パッセージは、ホンダインポートモデルのエキスパート・ディーラーです。
PASSAGE HOME
基本情報 カラーバリエーション スペック オプション PHOTOギャラリー
'15Crossrunner Specifications
Engine
Type   Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
Displacement   782cm3
Bore × Stroke   72 x 48mm
Compression Ratio   11.8 : 1
Max. Power Output   78kW/10,250min-1 (95/1/EC)
Max. Torque   75Nm/8,500min-1 (95/1/EC)
Idling Speed   1,200min-1
Oil Capacity   3.9 litres
Fuel System
Carburation   PGM-FI electronic fuel injection
Throttle Bore   36mm
Aircleaner   Oil-permeated, cartridge-type paper filter
Fuel Tank Capacity   20.8litres
Electrical System
Ignition System   Computer-controlled digital transistorised with electronic advance
Ignition Timing   8° BTDC (idle) 〜50° BTDC (1200min-1)
Sparkplug Type   IMR9D-9H (NGK); VNH27Z (DENSO)
Starter   Electric
Battery Capacity   12V/11AH (YTZ-12S)
ACG Output   427W
Headlight   LED (Hi-2/Low-2) with extension
Drivetrain
Clutch   Wet, multiplate with coil springs
Clutch Operation   Hydraulic
Transmission Type   Constant mesh 6-speed
Primary Reduction   1.934 (64/33)
Gear Ratios 1 2.846 (37/13)
  2 2.062 (33/16)
  3 1.578 (30/19)
  4 1.291 (31/24)
  5 1.111 (30/27)
  6 0.965 (28/29)
Final Reduction   2.687 (43/16)
Final Drive   O-ring sealed chain
Frame
Type   Diamond; aluminium twin-spar; pivotless
Chassis
Dimensions (L×W×H) 2,190 x 870 x 1,360mm
Wheelbase   1,475mm
Caster Angle   26°30'
Trail   103mm
Turning Radius   2.8m
Seat Height   835/815mm
Ground Clearance   165mm
Kerb Weight   242kg
Max. Carrying Capacity   -
Loaded Weight   -
Suspension
Type Front 43mm HMAS cartridge-type telescopic fork with stepless preload and ten DF adjustment, 131mm axle travel, 145mm stroke
  Rear Pro-Link with gas-charged HMAS damper, 35-step (remote-controlled hydraulic) preload and stepless rebound damping adjustment, 148mm axle travel
Wheels
Type Front 10-spoke cast aluminium
  Rear 10-spoke cast aluminium
Rim Size Front 17M/C x MT3.50
  Rear 17M/C x MT5.50
Tyre Size Front 120/70-R17M/C
  Rear 180/55-R17M/C ()
Tyre Pressure Front 225kPa
  Rear 250kPa
Brakes
Type Front 310mm x 4.5mm dual floating hydraulic disc with radial fit 4-piston calipers (*ABS) and sintered metal pads
  Rear 256mm x 6mm hydraulic disc with 2-piston caliper (*ABS) and sintered metal pads
 
All specifications are provisional and subject to change without notice.